Door Locks / September 17, 2018 / Estelle Abril
Another option is the deadbolt lock type which often complements a latch lock. Ideally a deadbolt should be situated top and bottom of the door to make it that much harder to pry the door open. If you are having a little bit of trouble selecting the lock that you want to use then there are a few different things that can help you make a decision. The first thing that you want to think about is the people who are going to be using the lock. You want it to be easy for them to get in and out of the door. However at the same time you want to choose a lock that is going to keep thieves out of your home.
Based on a crime survey most burglars enter through unlocked windows or doors lock picking and lock bumping and they choose houses that have no deadbolts or secure locking systems. The deadbolt locking mechanism has been incorporated in keyless door locks so now there are combination door keyless deadbolts digital keyless deadbolts and other types of electronic keyless deadbolts such as those with fingerprint and remote control options. Here are some types of keyless deadbolt door locks that you can choose from: Schlage Electronic Pushbutton Deadbolt Keyless Lock You can store up to 19 four-digit codes with this lock which you can install on your front doors patio doors or garage doors. It has a motor drive and its battery lasts up to 3 years. It also features a keyway for emergency key use.
If you are still looking for the best garage door locks to secure your garage here are some advice and information gathered from law enforcement and security systems personnel. Choosing Door Locks Replace standard door locks that usually come with garage doors as they are not resistant to picking hammering and other attacks. For overhead doors that roll up or tilt up secure them with bolts or padlocks that are installed in the center of the tracks one-fourth of an inch above the roller when the door is closed. You can also choose a padlock and bolt combination and extend the bolt into the metal sleeve and have it recessed into the driveway by about two or three inches.